13
Place the polishing puck assembly into the scribe
entrance by inserting the exposed fibers into the fiber stub
basin.
Caution: The catch basin of the polishing base should be
emptied often and before storing. Safely dispose of
fibers per your company’s practice. The basin should
only be used for fiber scraps, no other debris should
be inserted.
Tech Tip: Ensure that the polishing face is in the correct
orientation for the scribe motion. Note outline
of puck face in scribe track. Also, care should be
exercised in landing the polishing puck assembly
into the scribe entrance.
4.14 Move the polishing puck assembly smoothly through
the scribe channel. As the puck slides through the scribe
channel, continue the motion all the way across the
lapping film.
Tech Tip: Use caution when sliding puck through scribe
channel. Keep pressure on polishing puck. Do not
lift when going across scribe.
