Page 28
3M
™
Straight Line Laminator Single Head Manual
|
Original Assembly and Operation Instructions
Effective: August 2022
Figure 25
3 . Turn the adjusting sleeve (Figure 25A) counter-clockwise to increase the track width on the
adjustable deflection pulley . Turn the adjusting sleeve clockwise to decrease the track width
on the adjustable deflection pulley .
4 . Adjust the track width to the new tape width (Figure 25B) . To do so, turn the adjusting sleeve
(Figure 25A) clockwise to the corresponding track width .
NOTE:
Make sure that the adhesive tape can move properly in the new track .
Figure 26
5 . Turn the locking washer (Figure 26B) clockwise against the adjusting sleeve to fix it in place .
The new track width is set up.
A
B
A
B
