3M SST, Manual

Page: 29 / 90

SST Transport and Burster Mechanism Manual 75-0302-1450-8, Version 1 Ch. 2 Overview of the SST Transport Components • 19
Note: An HP-1 must have an HP-1 breakout board and an HP-4 must have an HP-4 breakout
board to function properly. Without the breakout board, the SST Transport and the CPU
board will become damaged and factory repair will be required.
To plug the Breakout Board into the CPU Board, plug the 50-pin connector J1 into the 50-pin
connector on the CPU Board. Refer to Figure 2.14 for an illustration of the Breakout Board aligned
with the CPU Board.
Note: Make sure the pins are well aligned prior to plugging together the connectors.
Figure 2.13
Breakout Board
50-pin Connector J3 to PCB-4
Board
26-pin Connector J2 to
Print Head
20-pin Connector J4 to
CPU Board
50-pin Plug J1 (underneath) Plugs
Into 50-pin Connector on CPU
Board