![background image](http://html1.mh-extra.com/html/3m/sp-se-2-1-1/sp-se-2-1-1_user-manual_3298346040.webp)
27 Basic setups
Meter 1/Meter 2 Parameters (i.e. response time, weighting)
Models SE and DL
Meter 1/Meter 2 Parameters (i.e. response time,
weighting)
Setting up Meter 1 and Meter 2 parameter settings are changed through the
softkeys and the Measure Set screen of the SoundPro.
Setting up Meter 1 and/or Meter 2 parameters
1. Ensure you are at the start screen.
•
If turned on, press
On/Off/Esc
repeatedly until you return to the
start screen (see Figure 3-3).
2.
Press
Up/Down
to highlight
Setup
and then press
Enter .
3. Select
Meter Set
by pressing
Up/Down
to highlight and then press
Enter
.
4. To set the
response time
for Meter 1, press the second softkey repeatedly
until the either
Fast (F),
Slow (S)
, or
Impulse (I)
is selected.
•
An underline denotes which feature is selected.
5. To set the
weighting
for Meter 1, press the third softkey repeatedly until
either
A, C, Z, of F
is underlined (or selected).
•
To set
Meter 2
response time and weighting, press 4
th
softkey until
Meter 2 is selected. Then repeat steps 4 & 5.
6. To change the Meter parameters, press
Up/Down
to select one of
the Meter Set fields.
7. To change any of the values, press
Enter
to move to the data fields.
•
Continue to press
Enter
until the specified setting is selected. Press
the
Left
arrow to return to the Meter Set fields.
Figure 3-4: Meter 1 and Meter 2 parameters
Meter Set fields
Press up/down
arrows to move
between the
parameters
Parameters
Press Enter
repeatedly to
toggle through the
selections
2
ND
softkey– Response time
3
RD
softkey– Weighting
4
th
softkey– Meter 1/Meter 2
Summary of Contents for SP-SE-2-1/1
