3M SP-SE-2-1/1, User Manual, Page: 50 / 168

37
Models SE and DL
Advanced setups
This chapter covers the SoundPro models SE and DL features listed below,
all of which provide capabilities beyond the essential ones required for basic
model setup and basic sound measurement. For information about basic
SoundPro models SE and DL features and setups, see
Chapter 3, “Basic
setups.”
For information about the notation and navigation conventions that
are used in these explanations, see Chapter 1, “Introduction.”
•
Auto-Run
- Similar to an “Auto-Start” feature, it will automatically start
and stop sessions based on time, date, duration settings and level-
triggered run mode (which is used to control runtimes of studies and
sessions using internal and external signals.)
•
Triggering -
Control the runtimes of studies and sessions using internal
and external signals.
•
Security
- Prevent certain uses of the instrument by someone who
doesn’t know the security codes (available for all instruments).
•
Logging
- Periodically save selected measurements at a preset interval
during all studies of a session (only for DL models).
•
GPS
- Obtain position and time information from the global positioning
satellite system, and store that information with each study that you
perform (only available if you have a compatible GPS receiver).
CHAPTER
4