3M Ranger 145, Operator'S Manual

Page: 11 / 24

202041B
Introduction 7
CAUTIONS
1. To prevent tipping, do not mount this unit more than 56” (142 cm) from the floor to the base of the pressure infusor unit.
2. This product is designed for pressure infusion only.
3. Do not sterilize the pressure infusor.
4. To reduce the risks associated with environmental contamination follow applicable regulations when disposing of this device or
any of its electronic components.
5. Do not immerse the pressure infusor in cleaning or disinfecting solutions. The unit is not liquid proof.
6. Do not clean the pressure infusor with solvents. Damage to the case, label, and internal components may result.
7. Do not pinch the power cord of the pressure infusor when attaching other devices to the I.V. pole.
NOTICES
1. Federal law (USA) restricts this device to sale by or on the order of a licensed healthcare professional.
2. The Ranger pressure infusor unit meets medical electronic interference requirements. If radio frequency interference with other
equipment should occur, connect the unit to a different power source.
3. To reliably ground this Ranger pressure infusor unit, only connect to receptacles marked “Hospital Only”, “Hospital Grade” or a
reliable grounded outlet.
4. To avoid Ranger pressure infusor damage:
• do not immerse the Ranger pressure infusor or pressure infusor parts or accessories in any liquid or subject them to any
sterilization process.
• do not use solvents such as acetone or thinner to clean the pressure infusor; avoid abrasive cleaners.
• clean pressure infusor exterior with soft cloth using plain water or a mild, all-purpose or nonabrasive cleaner.