3M Ranger 145, Operator'S Manual

Page: 13 / 24

202041B
Introduction 9
Pressure infusor panel
The pressure infusor panel displays the status of the pressure infusors. The pressure infusor power indicator illuminates amber
(standby) when the main power switch is turned ON and the pressure infusors are able to be turned ON. A green LED indicates that
the infusor is ON. To pressurize/depressurize the pressure infusor, verify the pressure infusor door is closed and latched, then press the
pressure infusor power button. Each pressure infusor is controlled independently.
Pressure Infusor Power
no power to unit standby ON
The indicator on the power button
notifies the user of the status of each
pressure infusor. No light indicates that
the unit is either not plugged in, the
main power switch is not turned ON, or
there is a system fault. See “Section 4:
Troubleshooting” on page 13 for more
information.
An amber indicator notifies the user that
the pressure infusor is in standby mode
and is ready to be turned ON.
A green indicator notifies the user that
the infusor is pressurized.