3M Multimedia Projector MP8760 Operator'S Manual Download Page 20

Page: 20 / 37

Downloaded from Projector.com



Multimedia Projector MP8760



3M IPC 2000

ENGLISH

5-2.

Meaning Of The Icons

An icon will display to indicate a presentation tool is active.

Pointer mode

Activate with

Pointer

button on IR-Remote control

In the Pointer mode you can move a pointer over and arround the picture area.
By pressing the

Pointer

button on the remote control a second time it will be turned off.

Freeze mode

Activate with

Freeze

button on IR-Remote control

In the Freeze mode the picture will be freezed.
Pressing the

Freeze

button on the remote control a second time or the

Magnify

button, the freeze mode will be turned

off.

Magnify mode

Activate with

Magnify

button on IR-Remote control

In the magnify mode the image can be magnified (zoomed). With the

–(1)

and

+(3)

buttons you can decrease or

increase the magnifying factor. You can select the magnified area by using the

Disc Pad

Pressing the

Magnify

button on the remote control a second time, the magnify mode will be turned off.

Reveal mode

Activate with

Reveal (7)

button on IR-Remote control

In the reveal mode the picture will be covered by a grey sheet. You now can reveal the covered image by using

Disc

Pad

. Pressing the

Reveal

button on the remote control a second time, the reveal mode will be turned off.

Muting mode

Activate with

Mute

button on IR-Remote control

In the muting mode the sound output of the projectors internal speakers and the external output will be muted.
Pressing the

Mute

button on the remote control a second time, the muting mode will be turned off.

Mouse emulation (Only in data mode [PC/RGB _] available!)

Activate with

Mouse

button on IR-Remote control

If you’ve connected the projector with the mouse cable and the right adapters to your PC and turned on the projector
before booting the PC it will emulate a mouse over the IR remote control transmitter.
By pressing the

Mouse

button on the IR remote control the mouse emulation will be activated. You can move arround

the mouse pointer with the

Disc Pad

. The

Disc Pad

is pressure sensitive, that means so stronger you press the pad so

faster the mouse pointer will move. The mouse buttons will be emulated by the two buttons

left

and

right

beside the

Discpad

. . The drag function can be emulated by the

Drag (2)

button below the

Disc Pad

. The mouse emulation can

be turned off by pressing the

Mouse

button a second time.

Summary of Contents for Multimedia Projector MP8760






































Search results

Summary of Contents for Multimedia Projector MP8760

Reviews:

Related manuals for Multimedia Projector MP8760

Brands by name

Popular brands

3M Multimedia Projector MP8760, Operator'S Manual

Search results

Summary of Contents for Multimedia Projector MP8760

Reviews:

Related manuals for Multimedia Projector MP8760

Brands by name

Popular brands