Downloaded from Projector.com
3M IPC 2000
3M
Multimedia Projector MP8760
7
ENGLISH
Section 4: Operating Instructions
4-1.
Power Up Projector
Read the Important Safeguards before operating the MP8760 projector. After all cable connections have been
completed, the projector can be powered up. During operation, keep the exhaust and intake air vents clear of
obstructions to allow proper cooling.
!
Caution
Allow a projector that has been stored in a cold place to warm up to room
temperature before applying power.
Figure 4-1. Power Up Projector
1.
Press the
Main Power
switch
(1)
to ON. A red LED indicator will illuminate to indicate there is power.
2.
Press the
Standby
button
(2)
to illuminate the lamp. A red LED indicator will turn green as an image appears
and grows brighter on the screen.
3.
Check all
ventilation slots
(3)
and clear away all obstructions.
!
!
!
!
Note
Ventilation vents are located on the top and back of the projector. Do not
block airflow by placing objects on top of the projector.
4.
Adjust the
Focus
(4)
and
Zoom
(5)
for best image.
5.
Press the
Foot Release
button
(6)
to release the
height adjustment foot
(7)
.
6.
Power up your computer and video source(s).
!
!
!
!
Note
In most cases, the projector will automatically adjust to the graphic mode
of your computer by selecting a pre-programmed setting.
ENTER
FOCUS
ZOOM
PC
MENU
VIDEO
AUX
+
+
—
—
EPS-18A
O
I
3
1
5
6
7
4
2
