1
1. Carefully remove earth from around cables per Table I.
See Figure 30.
Length
Width
Depth
170mm (70")
101mm (0")
10mm (")
Table I
2. Fill excavation with coarse gravel to within 75mm (3")
of ground level. See Figure 31.
3. Place cabinet over cables and center on excavation.
4. Attach a sib mount Angle Iron to each side of the
cabinet using the six 3/8" x 1" bolts provided. Do not
tighten. See Figure 32.
NOTE: Anchor Stakes must be used in conjunction with
split slab.
5. Place an Anchor Stake next to cabinet side. (Protect
stake top with wood block to prevent damage while
driving.) Using a sledge, drive until stake top is 150mm
(6") above ground level. Repeat for opposite side. See
Figure 33.
Figure 30. Remove earth around cables
Figure 31. Filling with gravel
Figure 32. Bolt on Angle Irons
Figure 33. Drive in Stake
Summary of Contents for MS2 4000 Series
