![background image](http://html1.mh-extra.com/html/3m/dynatel-7550-series/dynatel-7550-series_operators-manual_442988006.webp)
6
78-9000-5020-0 Rev C
B. Direct Connect Information
!
WARNING
This WARNING applies to the use of the Direct Connect Cables and the Transmitter.
To avoid potential shock, or electrically damaging the Transmitter, when setting up the
Transmitter to locate using the Direct Connect method, follow these basic steps;
• ALWAYS plug the Direct Connect Cable into the Transmitter Output Jack [T-6] BEFORE
connecting the leads to the cable/pipe to be located and the ground rod.
– Connect the red lead to the cable/pipe.
– Connect the black lead to ground rod.
A POTENTIAL FOR ELECTRICAL SHOCK, AND/OR TRANSMITTER ELECTRICAL DAMAGE, EXISTS
WHEN USING THE DIRECT CONNECT CABLE ON CABLES ENERGIZED WITH ELECTRICAL POWER
IF THE ABOVE INSTRUCTIONS ARE NOT FOLLOWED. USE APPROPRIATE SAFETY PROCEDURES.
CHECK VOLTAGE BEFORE CONNECTING TRANSMITTER. VOLTAGE HIGHER THAN 240 VOLTS WILL
DAMAGE EQUIPMENT. FOLLOW STANDARD PROCEDURES FOR REDUCING THE VOLTAGE.
C. Receiver Battery Information
!
WARNING
To reduce the risks associated with fire and explosion when using Lithium Ion batteries:
•
Do not short, excessively heat, or dispose of batteries in fire;
•
Do not pierce, modify or damage the battery, circuitry or packaging;
•
Do not allow the battery to get wet;
•
Only use the supplied charger or purchase a new charger from 3M;
• Do not operate batteries outside of -20° to 50° C (-4 ° to 122 °F).
• Only charge batteries in an indoor environment, with a temperature range of 0° to 45°C (32°
to 113°F)
• DO NOT DOUSE A BURNING BATTERY! USE A FIRE EXTINGUISHER!
To reduce the risks associated with fire and explosion when using Alkaline batteries:
•
Install batteries with proper polarity.
• Use only Alkaline “AA” (LR 6) with the included holder and adapter.
•
Do not charge Alkaline batteries.
•
Do not use leaking batteries.
!
CAUTION
To reduce the risks associated with environmental contamination:
Dispose of batteries and electronic components in accordance with all federal, state and local
regulations.
!
ATTENTION
Shipping issues regarding batteries:
In many cases the outside of the packaging must have an appropriate warning label and the
package may have weight restrictions;
Transportation regulations continuously change so please seek the advice of shipping agencies.