![background image](http://html1.mh-extra.com/html/3m/dynatel-7550-series/dynatel-7550-series_operators-manual_442988036.webp)
36
78-9000-5020-0 Rev C
All International receivers default to 50 Hz. To set the receiver to detect 50 Hz signals
refer to Enabling/Disabling Frequencies section of this manual.
C. Passive Frequencies
The receiver (without a 3M
™
Dynatel
™
Transmitter 7500 Series) can be used to detect
some CATV cables (31.5 kHz). (A horizontal-scan television NTSC must be turned on to
generate this frequency.)
•
Press
Menu/
OK [6] (you may have to press
Menu/
OK [5]
twice to toggle to the
LOCATE MENU display).
•
Press
Cable/Pipe
[SK].
•
Press
Freq
[SK].
•
Press
Pasv
[SK Toggle].
•
Press
Menu/
OK [6] to return to Locate mode.
D. Auxiliary Frequencies
Auxiliary frequencies are signals generated from remote location transmitters, or
frequency generating transmitters.
•
Press
Menu/
OK [5] (you may have to press
Menu/
OK [5]
twice to toggle to the
LOCATE MENU display).
•
Press
Cable/Pipe
[SK].
•
Press
Freq
[SK].
•
Press
Aux
[SK Toggle] until the desired frequency is displayed; (“Aux” 512, 560, 333
Hz, or user defined frequencies).
•
Press
Menu/
OK [6] to return to Locate mode.