78-9000-5020-0 Rev C
55
Step 6. The operator may select
User Edit
in order
to ‘type’ the modification, or
Delete Row
to
remove the entire row from the template, or
select
Show All
to display a list of common
compressed terms.
Note: Using a common compressed term requires
less memory in the marker.
Step 7. Select an option from the list by pressing
the up/down arrows [SK]. Press
/OK
[5].
Step 8. If
User Edit
is selected, the following
display will appear.
Step 9. Move the boxed cursor to the ‘back arrow’
and press
Select
[SK] to delete the entry to
be modified.
Step 10. Move the boxed cursor by pressing the left/
right arrows [SK] or the Up/ Down Arrow
[SK] to move the cursor to the next row.
Step 11. Press
Select
[SK] to enter the alphanumeric
character.
−
Entry will appear at the top of the
display.
Step 12. Press
/OK
[5] when entry is complete.
Step 13. If
Show All
is selected, the following display
will appear.
Step 14.
Select a common compressed term from the
list by pressing the up/down arrows [SK].
Step 15. Press
/OK
[5]. The modification will
automatically populate the marker template.
16. Reading 3M™ iD Markers
The operator can retrieve the data from the 3M
™
iD Marker by pressing
Read
[SK] on the
Marker Locate display.
The receiver tip should be lowered to the ground to reach maximum read depth.
If more than one 3M
™
iD Marker of the same utility is detected, the receiver will read the
first marker and display the data from the marker.
The fourth yellow command key will be labeled
“Read Next”
. Press this key to extract the data from
the other marker.