3M 6204, User Manual

Page: 50 / 144

1 2 3 4 5
6 6 6 6
7 8 9
Reader Startup Tool
Reader Startup Tool Reader Startup Tool
Reader Startup Tool
38
38 38
38
3M Toll RFID Reader 6204
3M Toll RFID Reader 6204 3M Toll RFID Reader 6204
3M Toll RFID Reader 6204 User’s Guide
User’s Guide User’s Guide
User’s Guide
Macro Macro Macro Macro Input sub Input sub Input sub Input sub----window window window window
The
Macro Input
window shows the current script that will be sent to the
reader when the
Send to Reader
button is selected. The text in the
Macro
Input
window can be edited prior to being sent to the reader.
Macro Output sub Macro Output sub Macro Output sub Macro Output sub----window window window window
The
Macro Output
window is updated after the
Send to Reader
button is
selected. Look at this window to verify that each command line in a script
executed correctly. Look for the
−−>> ok
response from the reader for each
command line.
Macro
Macro Macro
Macro Variable
Variable Variable
Variables
ss
s Dia
Dia Dia
Dialog box
log box log box
log box
When a macro is sent to the
reader, the values for variables
must be resolved via this Windows
Dialog box. You can
[tab]
to each
value field and enter the desired
value.
For example, one macro can be
used for two different applications
by using variables for antenna
selection and transmit power.
Macro Example Macro Example Macro Example Macro Example
To configure the reader for FCC, Part 90 Dense operation, send the
following macro (
part90_6tari_lf640_PR_M2.mcr
):
# configure region
setup.region=fcc
setup.sub_region=fcc_part90
# set frequency
setup.advanced.preferred_frequencies=915950
# configure protocol
modem.protocol.isoc.control.auto_phy.enable=false
modem.protocol.isoc.physical.set(tari=tari_06_25,
return_link_freq=LF640, data_1_length=d1_len_20,
rt_modulation=rt_mod_pr,
tr_encoding=tr_enc_miller_2,interrogator_mode=dense)