3M 6204, User Manual

Page: 141 / 144

1 2 3 4 5 6 7 8 9
Appendix B
Appendix B Appendix B
Appendix B –
– –
– Error Handling
Error Handling Error Handling
Error Handling
3M Toll RFID Reader 6204
3M Toll RFID Reader 6204 3M Toll RFID Reader 6204
3M Toll RFID Reader 6204 User’s Guide
User’s Guide User’s Guide
User’s Guide
129
129 129
129
Warnings Warnings Warnings Warnings Event Event Event Event Description Description Description Description Corrective Action Corrective Action Corrective Action Corrective Action
SYMBOL_TABLE_
OVER_
REGISTRATION event.warning.sw Indicates duplicated registrations of the symbol. None required.
SYMBOL_TABLE_
WRONG_TYPE event.warning.sw Data type is invalid for the symbol. None required.
B.4.
Informational Messages
Informational Messages Informational Messages
Informational Messages
Informational messages describe various system events.
Message Message Message Message Event Event Event Event Description Description Description Description
AUX_PROCESS_FAILURE event.info The main processor has detected an
error in an auxiliary process.
HEATER_STATUS_ACTIVE event.info The heater is in active state.
IOP_EVENTS_DROPPED event.info The main processor has detected
events being dropped.
IOP_TAG_DB_OVERFLOW event.info The main processor has detected an
overflow in the tag database.
IOP_TMR_NO_EVENTS_
PENDING event.info Indicates a timer signaled attention,
but there were no timer events
pending.
IOP_TMR_NOT_ACTIVE event.info Indicates a timer operation is being
performed on an expired timer.
ITEM_NOT_FOUND event.info Indicates a search failure.
MDM_RESET_COMPLETE event.info Modem reset is complete.
MDM_SET_TXDAC_WHILE_
IDLECW_ON event.info Indicates setting transmission DAC
values while IDLE cw is active.
MDM_TEMP_RESUME event.info Indicates temperature reaching
resume value.
NO_AVAILABLE_CONNECTIONS event.info Indicates the maximum number of
command/response or event channels
have been exceeded.
OUT_OF_MEMORY event.info Indicates the maximum number of
events allowed for registration has
been reached.
READER_ENTER_DUTY_CYCLE event.info Indicates the reader entering the duty
cycle.
READER_INIT_SUCCESS event.info Indicates the reader successfully
initialized.
READER_RECOVERY event.info Indicates the reader recovery being
performed.