4
Important Safeguards
(Continued)
The
"Safety Instructions"
label, shown in
Figure 1-3,
is attached to the left side of the
applicator next to the air regulator. This label
reminds operators and service personnel of the
recommended air pressure that the air regulator
should be adjusted to.
The
"Tape Threading"
label, shown in
Figure 1-4,
is attached to the right side of the S-857
cabinet near the top front edge. This label provides
a convenient tape threading diagram More detailed
tape loading and threading information is provided in
the operation section of this manual.
Figure 1-3 – Air Pressure Label
Figure 1-4 – Tape Threading Label
Summary of Contents for 3M-Matic S-857
