3M 3M-Matic S-857, Instructions And Parts List

Page: 8 / 45

5
Specifications
4. Cycle Time:
1.2 seconds per cycle
The cycle time is sufficient to satisfy the majority
of applications. Flow controls
(see page 17 – Air
Flow Controls) control the application rate and
return stroke rate of the air cylinder. While these
flow controls can be adjusted for increased
speed, this practice may result in higher
maintenance costs and shorten machine
life.
1. Tape Specifications:
Tape – Most "Scotch" brand filament tapes.
Tape Width – 3/8 inch [9 mm], 1/2 inch [12 mm],
or 5/8 inch [15 mm].
Tape Roll Diameter – Up to 15 inches [380 mm]
maximum on a 3 inch [76.2 mm] diameter core.
Applied Tape Length – 4 1/2 inches [115 mm]
(nominal). Tape legs are 2 1/4 ±1/8 inches
[55 mm ± 3.2 mm].
2. Air Power Requirements:
55 to 60 PSIG [380 to 415 kPa] gauge pressure.
2.16 SCFM [3.65 m 3 /h 21°C, 101 kPa] at 50
cycles/min
5. Operating Conditions:
Use in dry, relatively clean environments at 40°
to 120°F [5° to 49°C] with clean,
dry boxes.
Important – Machine should not be washed
down or subjected to conditions causing
moisture condensation on components.
6. Machine Dimensions:
Length – 31 inches [790 mm] (includes 360
yard [330 m] tape roll)
Height – 29 inches [735 mm] (includes 360
yard [330 m] tape roll)
Width – 11 inches [280 mm]
Weight – Packaged 83 lb [37.7 kg]
Unpackaged 75 lb [34 kg]
3. Box Size Capacity:
Bottom or Top Taping Position
Height – 2 1/4 inches [60 mm] minimum to
unlimited maximum
Width – 3 inches [75 mm] minimum to
unlimited maximum
Depth – 2 1/4 inches [60 mm] minimum to
unlimited maximum
Note: Operator capability will determine
maximum height, width, and depth.
Smaller heights and widths are sometimes
possible and it is recommended
that your
3M Representative be contacted for
testing of these applications.