3M 3M-Matic Dual S-867 II, Instructions And Parts List

Page: 61 / 62

41
Typical Mounting Set-Up
P/N 78-8079-5535-2 Single Head Stand, Type 29300
(Shown with S-867, Type 10500)
Standard "3M-Matic"
Mounting Equipment
The P/N 78-8079-5535-2 Single Head Stand provides a
self-contained system for supporting the S-867 "L" Clip
Applicator in the bottom taping position for automatically
applying "L" clips of "Scotch" brand Filament Tape to
box corners. The single head stand allows vertical
adjustment of the top work surface and can be adapted
to most conveyor or off line systems.
Suggested Custom Customer Set-Up
• The S-867 is designed for use with most conveyor or off-line systems.
• The following illustrations show several typical mounting set-ups of the S-867 in bottom taping or top taping
positions. To use front two holes for mounting as shown, remove existing retaining screws.
• Refer to the S-867 instruction and parts list manual for installation and set-up information.
• The following six illustrations denote non-standard mounting and require customer installation. For
qualification and additional mounting information, contact your local 3M Masking and Packaging
Systems sales representative.
S-867
"L" Clip Applicator
Type 10500
(Continued on back page)
Figure 1 – S-867 (Bottom Taping)
mounting direct to work surface.
Figure 2 – S-867 (Bottom Taping)
attached to conveyor.
Figure 3 – S-867 (Side Taping)
mounted adjacent to conveyor.
3M-Matic TM
Remove page. Not part of dual head S-867.