3M 3M-Matic Dual S-867 II, Instructions And Parts List

Page: 30 / 62

10
Installation and Set-Up
(Continued)
2. Assemble the tape drum/backup plate (D) to the
bracket (E) and adjust tape drum/backup plate in
or out to obtain the 1-11/16 inch [43 mm]
clearance between backup plate and bracket as
shown in Figure 2-3. Secure this setting with the
1/2-13 jam nut (F).
Tape Loading and Threading
See "Operations Section."
Tape Drum - Bracket Assembly
The tape drum bracket is supplied with two
#10-24 x 1/2 lg mounting screws. Assemble the
bracket to the machine and the tape drum to the
bracket.
1. Attach the tape drum bracket (E) to the rear of
the machine with two #10-24 x 1/2 lg soc hd
capscrews as shown in Figure 2-3.
Figure 2-4 – Air Control Unit – Set-Up