3M 3M-Matic 7000r, Instructions And Parts List

Page: 27 / 192

NA - ENG
April 2016
3M-Matic ™ 7000r-7000r3 Pro
Page 15
4.5 Tape Width
50mm [2 inches] minimum to 72mm [3 inches] maximum
4.6 Tape Roll Diameter
Up to 405mm [16 inch] maximum on a 76.2mm [3 inch] diameter core.
(Accommodates all system roll lengths of Scotch
®
fi lm tapes.)
4.7 Tape Width - Standard
70mm ± 6 mm [2.75 inch ±. 25 inch ]
Tape Application Leg Length – Optional
50mm ± 6mm [2 inch ±. 25 inch]
(See “Removing Taping Heads Procedure – Changing the Tape Leg Length”)
4.8 Box Board
Style – regular slotted containers – RSC
125 to 275 P.S.I. bursting test, single wall or double wall B or C fl ute.
23-44 lbs. per inch of width Edge Crush Test (ECT)
4.9 Box Weight and Size Capacities
A. Box Weight, fi lled: 5 lbs.– 85 lbs. [2.3 kg–38.6 kg]. Contents must support fl aps.
B. Box Dimensions for 7000r Pro and 7000r3 Pro Machines: Inches [mm]
* Boxes narrower than 8 inches [200mm] may require more frequent belt replacement
because of limited contact area.
To accommodate smaller or larger boxes, machine upper taping head frame and/
or outer column assemblies can be repositioned as described in “Special Set-Up
Procedure” section of this manual. Refer to illustration/chart for box height range
possibilities by adjusting machine upper frame and/or outer column positioning.
A Standard Pos. B Fully Raised Pos. C Lowered Pos.
Length Width AG 3 Tape Leg Tape Leg 2” [70]
(i.e. 2 3/4" [70]) (AG3/no bumper)
Minimum 6" [152] 6 1/2" [165]* 4 1/2" [115] 12 1/2" [317] 2 1/4” [57]
Maximum N/A 26" [660] 26" [660] 36" [914] 25 1/2” [647]
4. Speci fi cations
(continued)