3M 10500, Instructions And Parts List

Page: 29 / 50

NA - ENG
April 2017
3M-Matic ™ Accuglide 2+ - 3 Inch Taping Head
Page 21
Replacement Parts Illustrations and Parts Lists
AccuGlide™ 2+ Standard 3 inch Upper Taping Head, Type 10500
AccuGlide™ 2+ Standard 3 inch Lower Taping Head, Type 10500
1. Refer to the Taping Head Assemblies Figure to fi nd all the parts illustrations
identi fi ed by fi gure numbers.
2. Refer to the fi gure or fi gures to determine the individual parts required and
the parts reference number.
3. The replacement parts list, that follows each illustration, includes the part number and
part description for the parts in that illustration.
Note – The complete description has been included for standard fasteners and
some commercially available components. This has been done to allow
obtaining these standard parts locally, should the customer elect to do so.
4. Refer to the fi rst page of this instruction manual "Replacement Parts and Service
Information" for replacement parts ordering information.
Important – Not all the parts listed are normally stocked items.
Some parts or assemblies shown are available only on a special order basis.
Contact 3M/Tape Dispenser Parts to con fi rm item availability.
Spare Parts/Service Information
(continued)