3M 10500 Instructions And Parts List Download

Page: 11 / 50

NA - ENG

April 2017

3M-Matic

™

Accuglide 2+ - 3 Inch Taping Head

Page 3

AccuGlide

™

2+ Standard - 3 inch Upper and Lower Taping Heads consist of:

Qty.

Part

Name

Taping Head Assembly

Tape Drum and Bracket Assembly

Hardware and Spare Parts Kit

Threading Tool

General Information

This instruction manual covers safety aspects, handling and transport, storage, unpacking,

preparation, installation, operation, set-up and adjustments, technical and manufacturing

speci

cations, maintenance, troubleshooting, repair work and servicing, electric diagrams,

warranty information, disposal (ELV), a glossary with a de

nition of symbols, plus a parts

list of the 3M-Matic

™

Accugllide 2+ (3 inch) 3M Industrial Adhesives and Tapes Division

3M Center, Bldg. 220-5E-06 St. Paul, MN 55144-1000 (USA) Edition April 2017/

the product at any time without notice.

How to use this Manual

The manual is an important part of the machine; all information contained herein is

intended to enable the equipment to be maintained in perfect condition and operated

safely. Ensure that the manual is available to all operators of this equipment and the

manual is kept up to date with all subsequent amendments. Should the equipment be

sold or disposed of, please ensure that the manual is passed on with the machine.

Electrical and pneumatic diagrams are included in the manual. Equipment using PLC

controls and/or electronic components will include relevant schematics or programs in

the enclosure (or will be delivered separately as needed)

Keep the manual in a clean and dry place near the machine. Do not remove, tear or

rewrite parts of the manual for any reason. Use the manual without damaging it.

However, if the manual has been lost or damaged, ask your after sale service for a

new copy (if it is possible, please have the manual name, part number, and revision

information and/or model/machine name, machine type, and serial number) that

are located on the identi

cation plate:

(For example: Model - Accuglide 2+ - 3” - Type 10500 - Serial Number 13282).

Note:

All the important warning notes related to the operation of the machine are

identi

ed by the symbol:

Updating the Manual

Modi

cations to the machine are subject to manufacturer’s internal procedures.

The user may receive pages or parts of the manual which contain amendment made

after

its

rst publication. The user must use them to update this manual.

Taping Head Contents

Summary of Contents for 10500



















































Search results

Summary of Contents for 10500

Reviews:

Related manuals for 10500

Brands by name

Popular brands

3M 10500, Instructions And Parts List

Search results

Summary of Contents for 10500

Reviews:

Related manuals for 10500

Brands by name

Popular brands