3e Technologies International AirGuard 3e-525C-3 User Manual Download Page 97

Page: 97 / 100

3e–525C–3 Wireless Access Point

Chapter 6: Technical Support

29000171-001 A

Chapter 6: Technical Support

Manufacturer’s Statement

The 3e–525C–3 is provided with warranty. It is not desired or ex-

pected that the user open the device. If malfunction is experienced and

all external causes are eliminated, the user should return the unit to the

manufacturer and replace it with a functioning unit.

If you are experiencing trouble with this unit, the point of contact is:
[email protected]
1-800-449-3384 (Monday - Friday, 8am to 5pm EST)
or visit our website at
www.3eti.com

Radio Frequency Interference Requirements

This device has been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of the Federal Communications

Commission’s Rules and Regulations. These limits are designed to pro-

vide reasonable protection against harmful interference when the equip-

ment is operated in a commercial environment. This equipment gener-

ates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the

user will be required to correct the interference at his own expense.

Installation should be accomplished using the authorized cables

and/or connectors provided with the device or available from the

manufacturer/distributor for use with this device. Changes or modifica-

tions not expressly approved by the manufacturer or party responsible for

this FCC compliance could void the user’s authority to operate the equip-

ment.

Summary of Contents for AirGuard 3e-525C-3





































































































Search results

Summary of Contents for AirGuard 3e-525C-3

Reviews:

Related manuals for AirGuard 3e-525C-3

Brands by name

Popular brands

3e Technologies International AirGuard 3e-525C-3, User Manual

Search results

Summary of Contents for AirGuard 3e-525C-3

Reviews:

Related manuals for AirGuard 3e-525C-3

Brands by name

Popular brands