3e Technologies International AirGuard 3e-525C-3 User Manual Download Page 30

Page: 30 / 100

3e–525C–3 Wireless Access Point

Chapter 2: Hardware Installation

29000171-001 A

LED

Description

Power

The Power indicator LED informs you when the gateway is on or

off. If this light is on, the gateway is on; if it is not on, the gateway

is off.

WAN

This light indicates the state of your connection to the organiza-

tion's Ethernet LAN network. When on, the WAN light indicates

that the unit is connected to the network. When the WAN light is

off, the gateway does not have an active connection to the net-

work.

WLAN1 Activity (AP)

This light may be steady or blinking and indicates that infor-

mation is passing through the AP connection.

WLAN2 Activity

(Bridge)

This light may be steady or blinking and indicates that infor-

mation is passing through the Bridge connection.

WLAN Signal Strength

(Bridge)

The Strength LED indicator indicates the strength of the Bridge

connection (WLAN2).

1. LED Off: means no connection on the bridge side, or the signal

is very weak.

2. LED blinks slowly (every 1 second): means there is a connec-

tion, and the signal quality is poor.

3. LED blinks fast: means there is a connection, and the signal

quality is good.

4. LED steady on: means there is a connection, and the signal

quality is excellent.

Note: When the WLAN1 and WLAN2 LEDs blink simultaneously

then the system is halted. The software has discovered a problem with

the encryption algorithm or the system configuration does not pass the

integrity check.

Reset Button

You can reboot the 3e–525C–3 by pressing and holding the reset but-

ton on the front of the unit for five seconds. Input is acknowledged by the

LWLANSS LED turning on.

To reset the 3e–525C–3 to its factory default press and hold the reset

button located on the front of the unit for 10 seconds. Input is acknowl-

edged by the WLANNSS LED turning on and then turning off after 10

seconds.

Summary of Contents for AirGuard 3e-525C-3





































































































Search results

Summary of Contents for AirGuard 3e-525C-3

Reviews:

Related manuals for AirGuard 3e-525C-3

Brands by name

Popular brands

3e Technologies International AirGuard 3e-525C-3, User Manual

Search results

Summary of Contents for AirGuard 3e-525C-3

Reviews:

Related manuals for AirGuard 3e-525C-3

Brands by name

Popular brands