Identify Panels
Before you start to assemble the kit, lay out all of the panels and identify which panel
corresponds to the front, left, right, back, and top. Although the panels are labeled, it’s
easy to get them mixed up once the covering is removed, and very rarely a panel can
be mislabeled. This chart will help you keep them straight. Note the panels are shown
as they appear if you are located on their corresponding sides, i.e. the right side is
pictured as if you were standing on the right side of the enclosure, etc.
PANEL
PICTURE
HEIGHT WIDTH
FRONT
32”
27.44”
RIGHT
32”
40”
LEFT
32”
40”
PANEL
Copyright 2021
3DUpfitters LLC 7
