The CR-10 Max version also has smaller connectors at the
top and right side when viewed from the front.
The front should look like the picture to the right.
2. Assemble Front Door
Locate the magnetic latches and use the
wood screws
to attach them to the latch mounts. Hand tighten and
make sure they’re secure, but do not over tighten or
they may strip. The latch can be later adjusted front-to-
back to make sure the door is flush with the door
frame.
Each latch mount is attached via three screws. Two M4
10mm cap heads are used to attach the latch mount to
the side, while a 30mm cap head secures the latch
mount to the door frame.
Attach the hinges to the door and door frame using M4
12mm screws and nuts. There will be some play in the
hole size so that you can adjust the door to swing
freely.
Copyright 2021
3DUpfitters LLC10