3DMakerWorld Artifex 2, Build Instructions

Page: 22 / 118

3 LOWER FRAME AND COMPONENTS
•
Printed parts
– 100 YEndFront
– 101 FrontPanel
– 102 LowerVertexFrontLeft
– 103 LowerVertexFrontRight
– 104 YMotorMount
– 105 PSUFanDuct
– 106 PSUMountBottomFront
– 108 ElectronicsTopCover
– 109 ElectronicsMount
– 110 PSUCover
– 111 PSUMountBottomRear
– 112 LowerVertexRearLeft
– 113 PowerPanel
– 114 YEndRear
– 115 YIdlerMount
– 118 USBPanel
– 119 LowerVertexRearRight
•
Required tools
– 4mm hex screw driver: M5 SHS
– 3mm hex screw driver: M5 BHS & FHS
– 2.5mm hex screw driver: M4 FHS, M3 SHS
– 2mm hex screw driver: M3 FHS, GT2 pulley set screw
– 1.5mm hex key: Y-axis carriage
– Phillips screw driver (self-provided): PSU cover scews
– Scissor (self-provided): GT2 timing belt
3.2 Assembly Steps
3.2.1 Assembling lower frame
•
Connect the Y-axis rail support aluminum extrusion
– Allocate a 420mm aluminum extrusion with a M5 tapped hole on one side, and a
340mm aluminum extrusion with a through-hole drilled in the middle.
– Insert a M5
×
12mm BHS screw into the tapped hole of 420mm aluminum extru-
sion. Keep the screw half-way into the hole, and do not tight it up.
– Align the 420mm aluminum extrusion with the 340mm aluminum extrusion as
shown in Figure 3.1.
http: // 3dmakerworld. com
23