28
Multiview In and Out Ports
These ports are two 6-pin modular jack connectors. They allow Multiview support for frame locking
and rate locking of multiple computers.
Genlock In Port
This port is a 75-ohm male BNC connector that is used to connect to a 75-ohm coaxial cable
terminated with a female BNC connector. The port allows video timing to be synchronized to an
external timing source. The port provides a periodic signal to the display system to lock vertical
refresh rate.
Stereo Sync Out Port
This port is a female, 3-pin, mini-DIN connector. The port provides connection to the emitter module
for LCD shutter glasses or to other stereo shutter devices.
VIO Connector (Wildcat 4210 VIO Only)
The internal VIO connector on a Wildcat 4210 VIO card provides a path for direct image and alpha
channel data transfer to and from the card’s frame buffers.
Figure 13. Internal VIO Connector (Wildcat 4210 VIO Only)
VIO Connector
Summary of Contents for Wildcat 4210
Page 1: ... 3Dlabs Wildcat 4210 Graphics User s Guide ...
Page 4: ...iv ...
Page 6: ...vi ...
Page 20: ...14 ...