![background image](http://html1.mh-extra.com/html/3dhistech/de2bghm00010100001/de2bghm00010100001_user-manual_442155096.webp)
PANNORAMIC® DESK DW II 3.0.4
SETTINGS AND SERVICE
MARCH 30, 2021
95
To display an image of the barcode area, click
. You can redefine the barcode
reading area by dragging the edges of the green square. To check whether the barcode
reading settings are correct, display the barcode digits in the
Barcode
field by clicking
. If the label area is not correctly illuminated, adjust
Barcode LED intensity
value. Click
to check that barcode settings are correctly set. Click
Reset barcode
exposition time
to load default exposition time used for barcode reading.
Notice:
If you did not set the figure correctly, or there is no barcode in the barcode area, the
software will display the following error message:
“Barcode detection unsuccessful! There
might be no barcode present.”
o
Barcode reader library
▪
Select
MIL barcode library
or
Embedded
barcode library
o
General Barcode settings
▪
Inverse barcode color
Activate to invert foreground and background colors of the barcode.
▪
Use barcode compensation
A compensation image is used during barcode reading.
▪
Grab new comp
Click this button to create a new compensation image for barcode.
NOTE:
New compensation image for barcode can be recorded only if MIL
is used for barcode identification.
•
Barcode types
o
Linear
o
Stacked linear
o
Postal
o
Two-dimensional
Click
Select/Clear all
to select/deselect all barcode types on the list.