![background image](http://html1.mh-extra.com/html/3dhistech/de2bghm00010100001/de2bghm00010100001_user-manual_442155106.webp)
PANNORAMIC® DESK DW II 3.0.4
TROUBLESHOOTING AND MAINTENANCE
MARCH 30, 2021
105
Figure 84 – Removing a slide
1.
Exit Pannoramic® Scanner 3.0.4 control software.
2.
Switch off power supply and disconnect power cable.
3.
Remove the cover (see chapter
4.
Throw fixing lever
(3)
frontward to the left.
5.
Remove the slide
(1)
from the holder
(2)
.
Warning!
If the slide is broken, make sure to remove all pieces completely from the device. The edge
of the broken area of the slide is sharp and it can lead to injury and contagion! Broken slide
can be removed only by a well-trained person!
6.
Swing fixing lever
(3)
back to the right towards the holder.
7.
Reattach the cover (see chapter
8.
Connect the power cable of the power supply to the power outlet and switch on the
power supply.
9.
Launch control software.