21
www.3dtender.com
OUTBOARD MOTOR :
Install the outboard motor on the transom so that it is positionned as close to the center as
possible. Tighten the transom clamp screws evenly and securely. Occasionally check the clamp
screws for tighness during operation of the outboard motor because they could become loose
due to engine vibration. It is wise to tie the engine to the transom as well as clamping eyes are
provided. Always use the kill switch lanyard properly.
The portable tank should be removed from the boat when fuelling. The tank should be filled in
a ventilated area.
Do not smoke aboard.
Warning
Overpowering a boat can result in serious injury, death or boat damage. Do not use out-
board that exceeds the maximum horsepower given on the motor plate.
MAINTENANCE
Your inflatable has been especially designed to avoid maintenance problems os far as possible.
However, periodic cleaning will help to keep your boat’s good condition especially before winter
storage. Clean your boat and wash it thoroughly with soapy water. Rinse carefully and check
that no dirt or foreign bodies such as shell, sand or fishing hooks are left inside that might dete-
riorate the fabric. For tar stais use a gentle, non abrasive cleanser such as dishwashing soap, or
use a recommended inflatable boat cleaner available from most boat chandlery outlets.
General care :
CAUTION
- Do not use abrasive or agressive chemical compounds
- Warm soapy water is best in most situations
- Do not use any solvents, petrol, etc (PVC models)
- Use solvents sparingly only on Hypalon models
- Test any cleaner on a piece of patch materials if in doubt
