14
www.3dtender.com
Inflatable floor :
This is a flat inflatable floor with eventually a separate inflatable keel and a thrust board. Please
refer to the instruction below to install the floor.
- The keel (B) is already a stuck to the bottom when the boat is packed. Do not move the keel.
Install the thrust board (A) through the belt on the downside of the floor. The thrust board must
be placed under the floor and on the top of the keel (B).
- Place the deflated floor in the boat (do not inflate the keel), make sure the hole cut in the deck
is exactly on top of the valve of the keel (B).
- Inflate the inflatable floor to approximately O,3 bar.
- Push the sides of the floor under the tubes as far as possible.
- Inflate the floor to minimum 0,6 bar, maximum 0,8 bar.
- Inflate the keel to maximum 0,25 bar.
- Inflate the tube. (Please refer to the inflation instructions of this manual).
