18
www.3dtender.com
Load distribution
Please refer to the maximum number of passengers and load capacity of the boat in this manual
or on the manufacturer’s plate. Do not exceed the maximum number.
Position the passengers and distribute the load evenly in the boat to help counterbalance the
weight of the outboard.
In rough waters, load can be moved forward to ease the motion of the craft.
Caution
Keep the drain open when the boat is kept outside of the water. The rain water could fill
the boat and create stress and damage.
Danger
Do not open the drain plug when the boat is afloat but not in motion.
Performance
To achieve best performance, the boat must plane. If the boat does not plane, you may check
the following:
- Make sure sure the bilge / deck is dry, drain the water othewise.
- Make sure the tube is correctly inflated.
- Make sure you have the correct weight distribution. Sea conditions may require passengers to
move forward to the boat to get the boat on plane before they return to their initial positions.
The outboard engine plays a big role in the performance of the boat. Please make sure you use
a suitable outboard engine for the boat.
Outboard trim angle can be ajusted to improve planing and general performance. Adjust the po-
sition of the trim rod of your motor to define the trim angle of the outboard motor in relation to
the transom. Make test runs with the trim set to different angles to find the position that works
best for your boat and operating conditions.
