3D Systems PostCure 1050, User Manual, Page: 45 / 68

Mixed Material Curing Recipes
It is possible to mix some materials in the cure chamber and
cure them at the same time if they have compatible cure
recipes. Below is a compatibility list showing which General
recipes can be used with which materials. Although this
should provide acceptable post curing, the curing consistency
achieved by curing with the recipe optimized for each material
may provide a slightly improved curing quality.
SLA General Heated Cure Standard
• Accura AMX Rigid Black Standard
• Accura AMX Durable Natural Standard
• Accura AMX Tough White Standard
SLA General Heated Cure Low Distortion
• Accura AMX Rigid Black Low Distortion
• Accura AMX Durable Natural Low Distortion
• Accura AMX Tough White Low Distortion
SLA General Unheated Cure Standard
• Accura ABS Black Standard
• Accura Composite PIV Standard
• Accura Bluestone Standard
• Accura HPC Standard
• Accura PEAK Standard
• Accura Xtreme White 200 Standard
• Accura Xtreme Standard
Fig 4 General Heated Cure Standard
• Hi Temp 300-AMB Standard
• Rigid White Standard
• Rigid Gray Standard
• Flex-BLK 20 Standard
• Rubber-BLK 10 Standard
• Rubber-65A BLK Standard
• Tough-BLK 20 Standard
• Eggshell-Amb 10 Standard
• High Temp 150C FR Black Standard
• Tough 65C Black Standard
• Rigid 140C Black Standard
• Tough 75C FR Black Standard
Fig 4 General Heated Cure Low Distortion
• Hi Temp 300-AMB Low Distortion
• Rigid White Low Distortion
• Rigid Gray Low Distortion
• Flex-BLK 20 Low Distortion
• Rubber-BLK 10 Low Distortion
• Rubber-65A BLK Low Distortion
• Tough-BLK 20 Low Distortion
• Eggshell-Amb 10 Low Distortion
• High Temp 150C FR Black Low Distortion
• Tough 65C Black Low Distortion
• Rigid 140C Black Low Distortion
• Tough 75C FR Black Low Distortion
3D Systems, Inc. 42 p/n 40-D177, Rev. A