3D Systems PostCure 1050, User Manual, Page: 23 / 68

A
Base Recipe - The parameters of the current recipe
B
Name - The name of your custom material recipe.
Select to type in a custom name.
C
Drying Time - The recipe's drying time in minutes.
Select to adjust.
D
Curing Time - The recipe's curing time in minutes.
Select to adjust.
E
Cooling Time - The recipe's cooling time in
minutes. Select to adjust.
F
Max curing temperature - The maximum
temperature in °C that the curing chamber will
reach during a curing cycle. Select to adjust.
G
LED adjustment percentage - Change this number
to affect the percentage of LED power to be used
in curing cycle. Select to adjust.
H
Delete - Select to delete the recipe. There will be a
popup to confirm your deletion.
I
Save - Select to save the current iteration of the
recipe.
J
Start - Select to begin a curing cycle with the
recipe.
When you press Start on the screen above, you will then see the Cure Options screen:
1
The 100% value is for the specific recipe. Because different materials require different amounts of light, the 100% value
for one recipe is not the same light level as the 100% value for another recipe.
3D Systems, Inc. 20 p/n 40-D177, Rev. A