![background image](http://html.mh-extra.com/html/3d-printing-systems/up-plus-2/up-plus-2_user-manual_441976034.webp)
UP Plus 2 3D Printer User Manual v 2013.10.24
with is ABS or PLA.
TIP:
An empty spool weighs about 280 grams so, if you are installing a partially used spool,
weigh it, and subtract 280 grams from the weight. This gives you the value to enter into the mate-
rial text box.
Status:
Displays the temperature of the nozzle and platform.
Stop All:
Stops heating and all the movement of the printer. Once you click this button, the current
model being printed is cancelled. You CANNOT resume a print job once the printer has been
stopped. After you use the “Stop All” option, you will need to re-initialise the printer.
Pause Print:
This button allows you to pause a print in mid-progress, you can then resume the
print job where it left off. This is very useful if you, for example, want to change the material col-
our mid-print. Another popular use for pausing a job mid-print is to allow fasteners to be inserted
into printed cavities and then printed over to lock the fastener into place.
Note:
This keeps the ex-
truder and platform heating during the pause, it’s not recommended to pause for long periods of
time.
Nozzle & Platform:
The five buttons (FL, FR, Centre, NL, NR) control the position of the nozzle
and the platform. The nozzle moves to the left and right; the platform moves forward and back-
ward.
The “To” button controls the height of the platform, and is used in the nozzle height calibration
procedure described in 3.3.2.
The “Bottom” button returns the platform to the lowest position.
Set Nozzle Height:
Takes whatever value you have in the “To” box and transfers it to the Nozzle
box of the setup screen.
Summary of Contents for UP Plus 2
Page 1: ...UP Plus 2 3D Printer User Manual v 2013 10 24 ...
Page 8: ...UP Plus 2 3D Printer User Manual v 2013 10 24 2 1 Appearance Figure 1 Front view of printer ...
Page 10: ...UP Plus 2 3D Printer User Manual v 2013 10 24 2 3 Accessories PARTS ...
Page 56: ...UP Plus 2 3D Printer User Manual v 2013 10 24 ...