![background image](http://html.mh-extra.com/html/3d-printing-systems/up-plus-2/up-plus-2_user-manual_441976012.webp)
UP Plus 2 3D Printer User Manual v 2013.10.24
3. Quick Step by Step Setup Guide
1.
Remove the
two
packing clips that hold the extruder head
and platform in place during shipping.
(keep these for when you move your printer)
2.
Attach the “roll holder / feeder guide” onto the left side
of the printer.
3.
Open the foil bag that contains the ABS filament.
NOTE:
Do not let go of the end of the fila-
ment
, otherwise it will unravel itself and tie itself in a
knot, which will then cause a block in the extruder
head and several hours of unwinding the spool manu-
ally to find the knot!
4.
Load the spool of filament onto the roll holder, with the
filament coming out from the back of the roll / printer.
Do not let go of the end of the filament!
Summary of Contents for UP Plus 2
Page 1: ...UP Plus 2 3D Printer User Manual v 2013 10 24 ...
Page 8: ...UP Plus 2 3D Printer User Manual v 2013 10 24 2 1 Appearance Figure 1 Front view of printer ...
Page 10: ...UP Plus 2 3D Printer User Manual v 2013 10 24 2 3 Accessories PARTS ...
Page 56: ...UP Plus 2 3D Printer User Manual v 2013 10 24 ...