UP Mini 3D Printer User Manual
including the raft and any suppo
The price as 6/10/12 for ABS plastic from
working out to be 0.06 cents per gram.
5. Model Removal
When the model has finished
heating. Open the door, remove the clips and s
Slide the spatula under the model and slowly wiggle it back and forth to pry loose the model.
TIP:
Remember to use gloves
gloves must be worn.
CAUTION: It is strongly recommended that you
remove the model from the
3D Printer User Manual
including the raft and any support material.
/12 for ABS plastic from
www.3DPrintingSystems.com
was AU$59 per 1KG
cents per gram.
Removal
s finished printing, the printer will beep, and the nozzle and platform stop
Open the door, remove the clips and slide the Perfboard out from the printer platform
the spatula under the model and slowly wiggle it back and forth to pry loose the model.
se gloves as the platform and model may still be hot. The spatula is sharp,
CAUTION: It is strongly recommended that you wear safety glasses and
remove the model from the Perfboard or the support material from the model
40
was AU$59 per 1KG
nozzle and platform stop
printer platform.
the spatula under the model and slowly wiggle it back and forth to pry loose the model.
The spatula is sharp,
safety glasses and gloves to
or the support material from the model.
