![background image](http://html1.mh-extra.com/html/3d-printing-systems/up-mini/up-mini_user-manual_441971013.webp)
UP Mini 3D Printer User Manual
5.
Load the spool of filament
Check the diagram for the correct orientation
spool..
6.
Feed the end of the filament
Feed the filament through the feeder
about 10cm out the other end of the tube.
7.
Place the Filament and tube inside the back of the top
door.
8.
Push the end of the filament into the print head feed
hole.
9.
Slide the Perfboard into the platform
groves) and attach the binder clips
to hold the Perfboard
Perfboard after printing
the printer.
3D Printer User Manual
of filament onto the back of the printer.
Check the diagram for the correct orientation of the
Feed the end of the filament through the filament guide.
through the feeder tube and feed
about 10cm out the other end of the tube.
ilament and tube inside the back of the top
Push the end of the filament into the print head feed
Slide the Perfboard into the platform slots (between the
groves) and attach the binder clips on the front in order
to hold the Perfboard in place. Always remove the
after printing to remove printed models from
14