Printing Labels
2-9
Consumables
Transparencies are especially sensitive to a dirty paper path. If there
are shadows either on the top or the bottom of the sheets, see chap-
ter 4, “Printer Care,” of this manual for instructions on how to clean
the media path.
Printing Labels
Adhesive label stock has pressure-sensitive (peel and stick) adhesive
backing. The procedure for feeding labels is almost the same as for
regular paper; however, you must use the face-up output bin.
Recommended labels have the following specifications:
n
Type: Use only labels recommended for laser printers, such
as Avery 5260. Adhesive label stock should have pressure-
sensitive (peel-and-stick) adhesive backing.
n
Weight: The printer supports 17-34 lb (64-128 g/m
2
) labels
when using manual feed.
»
Note: Label data should be formatted within your application. Try printing
your data on a plain sheet of paper first to check placement. This reduces
the number of label sheets you use.
Printing Envelopes
Envelopes may be printed in two ways:
n
From the manual feed slot on the upper cassette (single enve-
lopes)
n
From the optional envelope tray (up to 100 envelopes)
Non-standard-size envelopes are acceptable using manual feed as
long as they fall into the following size ranges:
n
Minimum size: 3.5" x 7" (86 mm x 178 mm)
n
Maximum size: 7.4" x 10.5" (188 mm x 267 mm)
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
