3D Nord QMS 1725E Page 30 Operation Download

Page: 30 / 76

Cancelling/

Ending Print

Jobs

QMS 1725E Print Sytem Operation

3-6

(address, size, and free space). In addition, an angle bar prints in
the lower-left corner for image alignment.

Advanced—This document, which can be five or more pages
long, contains the same information as the standard status page
as well as configuration menu settings and a full list of fonts and
downloaded emulations.

Printing a Status Page

After you have identified the type of status page to print, send it to the
printer in one of the following ways:

Use the PS Executive Series Utilities (see the PS Executive on-
line help for instructions).

Use the control panel keys to select “Yes” in the Print Status
menu option.

Note: Only standard status pages can be printed from PS Executive.

Advanced status pages are not available.

Cancelling/Ending Print Jobs

The Cancel key has two functions:

It cancels all print jobs that are currently printing, interpreting, or
spooling.

It allows you to send an end-of-job indicator to a currently compil-
ing print job that is waiting for incoming data.

Menu

Administration/Special Pages/Status Page Type

Choices

Standard, Advanced

Default

Standard

Menu

Administration/Special Pages/Print Status

Choices

Yes, No

Default

Yes

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

Summary of Contents for QMS 1725E













































































Search results

Summary of Contents for QMS 1725E

Reviews:

Related manuals for QMS 1725E

Brands by name

Popular brands

3D Nord QMS 1725E, Operation

Search results

Summary of Contents for QMS 1725E

Reviews:

Related manuals for QMS 1725E

Brands by name

Popular brands