3D Nord QMS 1725E Page 50 Operation Download

Page: 50 / 76

Printer Problem

Checklist

QMS 1725E Print System Operation

6-6

Printer Problem Checklist

This section contains a list of possible printer problems and solutions.
If you have just installed your printer, be sure you have followed the
steps in chapter 2, “Setting Up Your Printer,” in the

Getting Started

guide.

If there is no display message, use the following steps to identify the
source of your problem and to learn of possible solutions:

Does the printer power light come on?

YES - Go to number 2.

NO - Check the following:

Is the power cord plugged into both the power outlet and
the printer?

Are both printer power switches in the On position (|)?

Is the power outlet working?

Does the line voltage from the power outlet match the
printer's power requirements? See appendix B, “Techni-
cal Specifications,” in your

Reference

guide.

Menu

Administration/Startup Options/Do Error Handler

Choices

Yes—Load the Error Handler.

No—Don’t load the Error Handler.

Default

Notes

Refer to the

PostScript Language Reference Manual (Adobe

Systems Incorporated, Reading, PA: Addison-Wesley, 1990,
ISBN 0-201-18127-4) for information on PostScript errors.

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

Summary of Contents for QMS 1725E













































































Search results

Summary of Contents for QMS 1725E

Reviews:

Related manuals for QMS 1725E

Brands by name

Popular brands

3D Nord QMS 1725E, Operation

Search results

Summary of Contents for QMS 1725E

Reviews:

Related manuals for QMS 1725E

Brands by name

Popular brands