Printing
Envelopes
QMS 1725E Print Sytem Operation
2-10
Formatting Data for Envelopes
Your printer receives the necessary instructions to print on envelopes
from your software. Read the printing section of your application man-
ual to find out how your software supports envelope printing. The
printer should be in landscape mode for most applications. Usually,
this is accomplished through the application.
When formatting data for envelopes, leave a 0.6" (15 mm) margin
from the edges of the envelope. Print on only one side. Remember,
some parts of an envelope consist of three layers of paper the front,
back, and flap. Print in these layered regions may be faded.
Printing a Single Envelope
Adjust the manual feed guides on top of the cassette to the correct
size of the envelope. Insert a single envelope into the manual feed
slot as shown in the following illustration, with the face up and the flap
side toward the left manual feed guide.
Because envelopes pass through heated rollers, the gummed area
on the flap may seal. Open the flap immediately after it passes
through the printer, before the seal cools. You may then reseal in the
Manual feed guides
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
