3Com Switch 7750 Family
ascii
1151
Quick Reference Guide
ascii
FTP client view
Use the
ascii
command to specify that files be transferred in the ASCII mode.
attack-protection
System view
Use the
attack-protection
command to set global Telnet protection. After you execute this command, the
system protects all the Layer-3 interfaces in the Up state.
Use the
undo attack-protection
command to cancel the global Telnet protection.
Use the
attack-protection
ip-address command to set special ARP Telnet protection. If the Layer-3 interface
corresponding to the specified IP address is in the UP state, Telnet protection is enabled on this Layer-3 interface.
If the corresponding Layer-3 interface does not exist or is in the Down state, the system saves this configuration
as the special ARP settings and enables Telnet protection when the corresponding Layer-3 interface is in the UP
state.
Use the
undo attack-protection
ip-address command to cancel the special ARP Telnet protection.
attack-protection disable-defaultroute
System view
Use the
attack-protection disable-defaultroute
command to disable the default-route Telnet
protection function.
Use the
undo attack-protection disable-defaultroute
command to enable the default-route Telnet
protection function.
attack-protection icmp
System view
Use the
attack-protection icmp
command to enable ICMP protection.
Use the
undo attack-protection icmp
command to disable ICMP protection.
attack-protection snmp
System view
Use the
attack-protection snmp
command to enable SNMP protection.
Use the
undo attack-protection snmp
command to disable SNMP protection.
attack-protection telnet
System view
Use the
attack-protection telnet
command to enable Telnet protection.
Use the
undo attack-protection telnet
command to disable Telnet protection.
attribute
Local user view
Use the
attribute
command to set the attributes of a local user.
Use the
undo attribute
command to cancel attribute settings of the local user.
authentication
ISP domain view
Use the
authentication
command to configure an authentication scheme for current ISP domain.
Use the
undo authentication
command to restore the default authentication scheme of current domain.
authentication-mode
User interface view
Use the
authentication-mode
command to specify the authentication mode.
authentication-mode
OSPF Area view
Use the
authentication-mode
command to configure one area of OSPF to support the authentication
attribute.
Use the
undo authentication-mode
command to cancel the authentication attribute of this area.
authorization
ISP domain view
Use the
authorization
command to configure the authorization scheme of the current ISP domain.
Use the
undo authorization
command to restore the default authorization scheme of the ISP domain.
auto-build
Cluster view
Use the
auto-build
command to add the candidate device to the cluster automatically to be a member device.
auto-execute command
User interface view
Use the
auto-execute command
command to set the command that is executed automatically after a user
logs in.
Use the
undo auto-execute command
command to disable the specified command from being
automatically executed.
