3Com Switch 7750 Family
display gvrp statistics
1165
Quick Reference Guide
display gvrp statistics
Any view
Use the
display gvrp statistics
command to display the GVRP statistics of specified or all trunk ports.
display gvrp status
Any view
Use the
display gvrp status
command to display the global GVRP status (enabled or disabled).
display habp
Any view
Use the
display habp
command to display HABP configuration and status information.
display habp table
Any view
Use the
display habp table
command to display the MAC address table maintained by HABP.
display habp traffic
Any view
Use the
display habp traffic
command to display statistics on HABP packets.
display history-command
Any view
Use the
display history-command
command to display history commands. All the history commands are
saved in the history command cache. When the history command cache is full, the old information in it will be
overlaid.
display hwtacacs
Any view
Use the
display hwtacacs
command to displays the configuration or statistics of the specified or all
HWTACACS schemes.
display icmp statistics
Any view
Use the
display icmp statistics
command to view the statistics about ICMP packets.
display igmp group
Any view
Use the
display igmp group
command to view the member information of the IGMP multicast group.
display igmp interface
Any view
Use the
display igmp interface
command to view the IGMP configuration and running information on a
VLAN interface.
display igmp-snooping configuration
Any view
Use the
display igmp-snooping configuration
command to display IGMP Snooping configuration
information.
display igmp-snooping group
Any view
Use the
display igmp-snooping group
command to display information about the IP and MAC multicast
groups under one specified VLAN (with vlan vlan-id) or all VLANs (without vlan vlan-id).
display igmp-snooping statistics
Any view
Use the
display igmp-snooping statistics
command to display IGMP Snooping message statistics.
display info-center
Any view
Use the
display info
-center command to display the operation status of information center, the
configuration of information channels, and the format of time stamp.
display interface
Any view
Use the
display interface
command to display port configuration.
display interface Vlan-interface
Any view
Use the
display interface Vlan-interface
command to display the related information of a VLAN
interface, including, physical state and link state of the VLAN interface, format of the sent frames, MAC address,
IP address and subnet mask of the VLAN interface, and descriptive string and MTU of the VLAN interface
display ip host
Any view
Use the
display ip host
command to display the hostnames and corresponding IP addresses in the static
DNS list.
