3Com Switch 7750 Family
gvrp
1183
Quick Reference Guide
gvrp
System view, Ethernet port view
Use the
gvrp
command to enable GVRP globally (in system view) or for a port (in Ethernet port view).
Use the
undo gvrp
command to disable GVRP globally (in system view) or on a port (in Ethernet port view).
gvrp registration
Ethernet port view
Use the
gvrp registration
command to configure the GVRP registration type on a port.
Use the
undo gvrp registration
command to restore the default GVRP registration type on a port.
habp enable
System view
Use the
habp enable
command to enable HABP for a switch.
Use the
undo habp enable
command to disable HABP for a switch.
habp server vlan
System view
Use the
habp server vlan
command to configure a switch to operate as an HABP server and HABP packets
to be broadcast in specified VLAN.
Use the
undo habp server vlan
command to revert to the default HABP mode.
habp timer
System view
Use the
habp timer
command to set the interval for a switch to send HABP request packets.
Use the
undo habp timer
command to revert to the default interval.
hardspeedup
System view
Use the
hardspeedup enable
command to enable command to enable the hardware speedup function
inside the port.
Use the
hardspeedup disable
command to disable the hardware speedup function inside the port.
hash
System view
Use the
hash
command to configure parameters used by the HASH algorithm in link aggregation.
Use the
undo hash
command to cancel the configuration.
header
System view
Use the
header
command to set the banners that are displayed when a user logs into a switch. The login
banner is displayed on the terminal when the connection is established. And the session banner is displayed on
the terminal if a user successfully logs in.
Use the
undo header
command to disable displaying a specific banner or all banners.
help
SFTP Client view
Use the
help
command to get the help information about the specified or all SFTP client commands.
higig-port mac-learning disable
System view
Use the
higig-port mac-learning disable
command to disable the HiGig ports from learning MAC
addresses.
Use the
undo higig-port mac-learning disable
command to enable the HiGig ports to learn MAC
addresses.
history-command max-size
User interface view
Use the
history-command max-size
command to set the size of the history command buffer.
Use the
undo history-command max-size
command to revert to the default history command buffer
size.
host-route
RIP view
Use the
host-route
command to enable RIP to accept host routes.
Use the
undo host-route
command to reject host routes.
hwtacacs nas-ip
System view
Use the
hwtacacs nas-ip
command to specify the source address of the hwtacacs packet sent from NAS.
Use the
undo hwtacacs nas-ip
command to restore the default setting.
