3Com Switch 7750 Family
mirroring-group monitor-slot
1199
Quick Reference Guide
mirroring-group monitor-slot
System view
Use the
mirroring-group monitor-slot
command to configure the destination mirroring I/O Module,
which must be LS81VSNP or LS82VSNP. In order to mirror a port to a I/O Module, the mirroring group must be
active.
Use the
undo mirroring-group monitor-slot
command to remove the configured mirroring
destination I/O Module.
mirroring-group (only for configuration recovery)
System view
Use the
mirroring-group
command to recover the port mirroring configuration.
mirroring-group reflector-port
System view/Ethernet port view
Use the
mirroring-group
reflector-port command to specify the reflector port.
Use the
undo mirroring-group
reflector-port command to remove the configuration of the reflector port..
mirroring-group remote-probe vlan
System view
Use the
mirroring-group remote-probe vlan
command to specify the remote-probe VLAN for a
mirroring group.
Use the
undo mirroring-group remote-probe vlan
command to remove the configuration of
remote-probe VLAN for a mirroring group.
mkdir
User view
Use the
mkdir
command to create a directory in the current directory.
mkdir
FTP client view
Use the
mkdir
command to create a directory on an FTP server.
mkdir
SFTP Client view
Use the
mkdir
command to create a directory on the remote SFTP server.
modem
User interface view
Use the
modem
command to configure the both attribute of the Modem.
Use the
undo modem
command to disable the both configuration.
modem auto-answer
User interface view
Use the
modem auto-answer
command to set the answer mode to auto answer.
Use the
undo modem auto-answer
command to set the answer mode to manual answer.
modem timer answer
User interface view
Use the
undo modem timer answer
command to restore the default timeout time.
monitor inner-channel
System view
Use the
monitor inner-channel
command to enable the function of monitoring internal channels.
Use the
undo monitor inner-channel
command to disable the function of monitoring internal channels.
monitor inner-channel
System view
Use the
monitor inner-channel upper-limit
command to set the maximum number of times of
monitoring internal channels.
Use the
undo monitor inner-channel
command to disable the function of setting the maximum number
of times of monitoring internal channels.
monitor slot
System view
Use the
monitor slot enable
command to enable switch chip auto-reset.
Use the
monitor slot disable
command to disable switch chip auto-reset.
monitor-link group
System view
Use the
monitor-link group
command to create a Monitor Link group and enter Monitor Link group view.
Use the
undo monitor-link group
command to remove a Monitor Link group.
more
User view
Use the
more
command to display the content of a specified file.
