3Com Switch 7757, Configuration Manual

Page: 640 / 940

640 C
HAPTER
60: ACL C
ONFIGURATION
<SW7750> system-view
[SW7750] acl mode link-based
[SW7750] display acl mode
The current acl mode: link-based.
Specifying the
Matching Order of
ACL Rules Sent to a
Port
The acl match-order { config | auto } command is used to set the matching
order of ACL rules when they are referenced by softwares. While the acl order
command is used to set the matching order of ACL rules after they are applied to
hardware). The Switch 7750 supports three matching orders of ACL rules applied
to a port:
depth-first , first-config-first-match , and last-config-first match .
You can specify one of the three orders.
Configuration Procedure
Configuration Example # Specify the matching order of ACL rules sent to hardware as
first-config-first-match .
<SW7750> system-view
[SW7750] acl order first-config-first-match
[SW7750] display acl order
the current order is first-config-first-match
Configuring Time
Ranges
The time range configuration tasks include configuring periodic time sections and
configuring absolute time sections. A periodic time section appears as a period of
time in a day of the week, while an absolute time section appears in the form of
“the start time to the end time”.
Configuration Procedure
Table 508 Set the matching order of ACL rules applied to a port
Operation Command Description
Enter system view system-view -
Set the matching order of the
configured ACL rules sent to
a port acl order { auto |
first-config-first-match |
last-config-first-match }
Required
By default, the configured
ACL rules sent to a port
match in the
depth-first
order, that is, the auto mode.
Display the matching order of
the ACL rules applied to a
port display acl order Optional
The display command can be
executed in any view
Table 509 Configure a time range
Operation Command Description
Enter system view system-view -
Create a time range time-range
time-name { start-time to
end-time days-of-the-week
[ from start-time start-date ]
[ to end-time end-date ] |
from start-time start-date [ to
end-time end-date ] | to
end-time end-date }
Required