Installation Manual
H3C S9500 Series Routing Switches
Appendix B Engineering Labels for Cables
B-14
II. Example of the label
Make sure that labels are affixed in correction direction. That is, after the cable ties are
bundled onto the cable, the identification plates with the labels should face up, and the
text on the labels in the same cabinet should be in the same direction, as shown in
Figure B-13
.
(1)
(2)
TO:
A01 -48V2
B08
TO:
B03 -48V2
Figure B-13
Example of the labels on the DC power cable
In
Figure B-13
, (1) indicates the label on the loaded cabinet side, which carries the
information about the position of the cable on the power distribution box. (2) indicates
the label on the distribution box side, which carries the information about the position of
the cable on the loaded cabinet side.
On the loaded cabinet side, the label marked with “A01/B08--48V2” on the cable
indicates that the cable is -48V2 DC supply, which is from the 8
th
connecter on the
second row of -48V bus bar in the cabinet on Row A, and Column 1 in the machine
room.
On the distribution box side, the label marked with “B03--48V2” indicates that the cable
is -48V2 DC supply, which is from the loaded cabinet on Row B, Column 03 in the
machine room.
