Configuration Utility
18
M101703V10
Check the table below to find the valid key length of each encryption type:
3.2.1.8 Default Key
Indicate which WEP key you intend to use for the WEP encryption from the pull-
down menu. Make sure that the intended access points or wireless devices on the
wireless network share the same key.
Key 1
is used by default.
3.2.1.9 Passphrase
Choose this command when the associated wireless network uses a passphrase to
create WEP keys. Enter the passphrase string in the
Passphrase
field to generate
encryption keys in the
Key
fields.
After you have finished configuring the
Encryption
features, remember to click
Apply
changes
to initiate the new settings. Press
Save
to save all changes.
3.2.1.10 Tx Power
A WLAN device normally operates in one of the following modes: transmit, receive,
or sleep. Adjust the transmit power level to maximize the goodput in the WLAN,
while minimizing the transmit power to save battery energy.
Key Type
64 bit
128 bit
ASCII
5 characters
13 characters
Hexadecimal
10 digits
26 digits
Note:
Be sure you have entered the correct encryption type informa-
tion in the fields described above according to the associated agent’s
configuration. If any information is inaccurate, the connection will fail.
Summary of Contents for OfficeConnect 3CRWE254G72
Page 52: ...Regulatory Compliance Information 48 M101703V10 ...
Page 53: ......